Free MG-20

Price request

Roller for handling heavy loads
  • Steel tube Ø 63.5 x 2.9, Ø 70 x 2.9, Ø 80 x 2, Ø 89 x 3
  • 2RS bearings
  • Strong thickness HOUSINGS stamped and crimped without decreasing the thickness of the tube
  • Stainless steel across flat shaft Ø 20 (other types available)
  • Tube th. 5 mm, Ø 25 shaft possible
  • Galvanised, stainless steel or rubber available on request
  • Roller compatible with ONROL89

Télécharger (PDF, 39KB)

Different shaft ends

Pallet guide flanges

For rollers Ø 70 and 89 (including SPROCKET rollers)

Pressed steel cups thickness 3 mm (5 mm on request) intended to ensure load centring on the rollers

There are removable flanges for rollers Ø 89

Permissible loads and roller weights (in kg)

Dynamically permissible loads with a rate of ≤ 120 pallets/hours up to 15 m/min.

In the case of the paces below these loads may be increased

L100200300400500600700800900100011001200130014001500
Ø70x2.9Charge statique
Charge dynamique400400380300260240220200180160140120
Poids1.322.73.54.24.95.76.47.17.88.69.31010.7011.50
Ø89x3Charge statique500500500500500490410360320295260240220200185
Charge dynamique400400380300260240220200180160140120
Poids1.62.53.44.35.36.27.1899.910.811.712.6513.5514.5